Looks like the strawberries are quite happy in their semi-aquatic home! This is my first aquaponic flower and, with a little luck, will turn into my first aquaponic strawberry fruit.Some leaves have been turning brown slowly from the tips but there have always been 2 new leaves to replace each old one so I haven't been that concerned. I've been adding just a little bit of Maxicrop liquid seaweed fertilizer once a week. The purple basil is starting to take off too and I'll likely have my first harvest in a few weeks.
Sunday, April 17, 2011
Monday, April 4, 2011
Nano-Aquaponics
The system in all its glory! |
Purple basil sprouting after directly sowing into the bed |
The first step was visiting the local hydroponics shop and picking up:
- a small pump (you don't need anything too beefy as it only is pumping the water about a foot and it doesn't need to pump that quickly)
- an ebb and flow plumbing kit which contains a bulkhead with screen for the flood portion and then a drain portion with a riser and screen on top of a bulk head
- a length of 1/2" and 3/4" tubing
- 10L of hydroton (I already had mine but you'll need it or 3/4" pea gravel works as well)
After gathering the supplies, I cut some of the lumber into 6 2' lengths. Four of these lengths were screwed into a square that will be the light support. I drilled an appropriately sized hole for the 2 bulk heads in the tub and unscrewed, attached, and rescrewed them on. I then attached the 1/2" hose to the inflow at one and and the pump at the other. I put the 3/4" hose on the outlet (to muffle the sound of outflowing water). I washed the hydroton (important step!) and then put it in the tub and set the tub on top of the light stand and other 2 pieces of lumber that I'd put across the top of the aquarium. After setting one of the timers to be on for 15 minutes and off for 45 minutes, I plugged it in and set the other timer to run on for 12 hours and off for 12 hrs. I'd intended to let the new system cycle for a few weeks so that bacteria could take over the new grow bed but became impatient and planted 3 strawberry starts in the bed, carefully making sure that the crowns were in the dry portion of the hydroton. The plants responded well (easily 2-3x the size of the other 7 starts I planted in a strawberry pot after 3 weeks) and so, as part of an experiment, I started some purple basil seeds in rock wool, on a heat mat in my seed starting chamber (description coming soon!), and directly in the hydroton bed. While the seeds in the seed starting chamber came up first, the ones in the aquaponics system have caught up and look like they're about to put out their first set of true leaves. I may change out the wood for an aluminum frame in the future and might add a few worms from the worm bin as the system matures. I know it isn't the prettiest system but it will look much prettier with delicious sweet strawberries included. In short, if you have a tropical fish tank already set up, this is a great way to recoup some of those costs, help keep your fish happy and healthy, and grow some food in a relatively small space. I'll be sure to make an update when I'm swimming in strawberries and basil! Does anyone else have a an apartment aquaponics system going?
Labels:
apartment garden,
aquaponics,
basil,
fish,
hydroponics,
indoor garden,
strawberries,
tropical
Subscribe to:
Posts (Atom)